|
Remember:
The product must have water flowing through the water cooling block when working! Water is used to cool the temperature of the Peltier and eventually produce hot water, the
temperature of the hot side exceeding 65 degrees Celsius will burn out semiconductor components！
Her power is limited 108W, she can not be used for room refrigeration and air conditioning, she is suitable for rapid
cooling of medical boxes, pet room air conditioning, fresh storage box , etc. for small space cooling or other occasions.
If you need to cool more space, choose a cooler with more power. 240W /360W /480W.....
Voltage电压: DC12V
Power功率:108W
The Working current: > 10A
Weight:400g
Fans size:40mm / 60mm
Interface caliber:8mm
Product installation connection diagram
F&Q
1.Question: As it works? This piece is cold way shown in picture? To make ice only in 12 V?
Answer: It works in DC12 V. If you change the polarity-would be the opposite, Good day work perfectly.
2.Question: It received But is not how it works, assists please？How can connect and necessary water pump ？
Answer roduct installation connection diagram
3.Question:how it use & works?
Answer:Similar to thermocouple but work in a reverse. Provide a voltage and then create a temperature difference.
Needs additional pump, and radiator cooling water.
4.Question:Can use as air for my car?
Answer:I don't think
5.Question:Hello. What time "minutes" waiting to get 21,0 degree? This device is for 12 V?
Answer:Turn off the fan, the room temperature is 18 degrees, about 3-5 minutes
6.Q: How much water is needed? Must the circulating water be closed?
Answer: 1. Keep the temperature of the flowing water as low as possible;
2. As long as there is water flowing through the semiconductor chip.
The ultimate goal: to let the water flow away more heat.
My WeChat：
My Email:litengfei20082008@163.com
| 
